SignaLink Jumpers for FT290R

Here’s how to set the jumpers in a SignaLink USB when connecting a Yaesu FT290R.


I found the jumper instructions on the Tigertronics website just a little too general, so this may save some time.Signalink jumpers for FT290R IMG 1043

The SignaLink works fine with PocketPacket on a Mac mini. ‘Use Vox for PTT’ was set in the PocketPacket Audio Modem preferences. The SignaLink delay knob was turned fully anticlockwise.

Using this setup I could receive and decode signals from a local packet test GM7RYR-10. I transmitted to the ISS packet digipeater but didn’t see any of my packets digipeated. However, I received my packets locally on my Yaesu FT60 and decoded them on a Raspberry Pi via Direwolf by WB2OSZ and Xastir.